What is tool transposer

Translation of "tool number" in English

These examples may contain rude words based on your search.
These examples may contain colloquial words based on your search.
These include feed rates, spindle speed and Tool number.
They include the feed rates, spindle speed, and tool number.
Sequential numbers starting from 0 become functional for tools of the same Tool number set.
Consecutive numbers from 0 are set for tools of the same functional tool number.
Entering the actual machining parameters, such as Tool number, Spindle speed, feed rate, etc.
Set actual machining parameters, such as tool number, spindle speed, feedrates, etc.
The Tool number indicates the position of the tool in the tool memory.
The tool number identifies the location of the tool in the machine's tool store.
Set the machining parameters at the same time, then change the Tool number for individual toolpath folders.
Set the cutter parameters simultaneously and then change the tool number for individual toolpath folders.
Tool number 1000 is registered for pot 1.
Give a Tool number as a 4-digit number.
A Tool number can be registered in the tool magazine for each pot.
A. tool number can be registered for each pot in the tool magazine.
Use this method to get a registered Tool number to change.
Thus, this method is used to change a registered tool number.
For a given tool, enter the Tool number in front.
Preset tool offset for Tool number on a lathe
Macro to find the next one Tool number.
Check whether the specified Tool number correct is.
Check the tool registration information if the Tool number correct is.
If the tool number is correct, review the tool registration data.
A fixed hole is defined by the X and Y coordinates and the Tool number described.
A fixed drill hole is described by the X and Y coordinates and the tool number.
Paste the new Tool number to a customer setting of the processing.
Add the new tool number to a custom setting of the operation.
The system always saves the calculated settings under its own Tool number.
The system always saves the calculated settings under a unique tool number.
The FTN (Functional Tool number) Method is usually selected for specifying the tool to be used in the replacement tool selection function.
The FTN (Functional Tool Number) method is usually selected as the method for determining the tool to be used in the spare tool selection function.
SL (lower limit) value 45.6 (%) is for Tool number 2000 set.
SL (lower limit) value 45.6 (%) is set for tool number 2000.
Example of a change in functional Tool number:
Possibly inappropriate content examples are used only to help you translate the word or expression searched in various contexts. They are not selected or validated by us and can contain inappropriate terms or ideas. Please report examples to be edited or not to be displayed. Rude or colloquial translations are usually marked in red or orange.
No results found for this meaning.

Results: 65. Exact: 65. Elapsed time: 76 ms.

Documents Corporate solutions Conjugation Definitions Spell check Help & about

Word index: 1-300, 301-600, 601-900

Expression index: 1-400, 401-800, 801-1200

Phrase index: 1-400, 401-800, 801-1200

© 2013-2020 Reverso Technologies Inc. All rights reserved.