How To Use Jabu Stone Beeswax

How to clean stones with household material

In this article:

introduction

Stones are one of the most common materials used in the construction of our homes. In fact, they are used for paving, building grills and still high. Clearing the stones is not very easy. These are very porous and absorb any substance that falls on them. There are many chemical products on the market for cleaning and polishing stones. However, this guide explains how to clean stones with natural products. We give useful tips on cleaning Stones with materials from home. We'll always provide you with a detailed and repeatable illustration of products available in every household.

required

  • Sodium bicarbonate
  • Pumice stone powder
  • liquid soap
  • Hydrogen peroxide
  • alcohol
  • Beeswax
  • Sponge and cloth

bicarbonate

A first natural remedy for using materials that you have at home is to use baking soda along with a liquid soap to create a type of abrasive cream that is applied to the stone being cleaned. Apply it over the dirty area and let it sit for a few minutes. Then rub the area with a synthetic sponge and rinse with natural water. Finally dry with a soft cloth. To make it shiny, you can also use beeswax, which will also get rid of the limestones released by the water and the substances used to remove the stain.

Hydrogen peroxide

Alternatively, hydrogen peroxide is a very effective material for removing dirt from a porous stone. When the stain is emulsified on the stain, it is removed by taking out the dirt trapped between the pores and at the same time removing the halo. If you have a polished stone, use pumice stone powder, apply it to the surface, and rub dry with a lightly abrasive sponge. Then carry out another cleaning and polishing with a cloth soaked in alcohol.

Other materials

If you need to carefully clean a cooked stone (e.g. red brick), rub a minimum of surface with a very fine-grained abrasive cloth. However, remember to always act in the same direction (i.e. perpendicular) to avoid streaks that could damage and scratch the surface. Then brush the linseed oil, let it dry for about half an hour, and then buff the surface with a soft, clean cloth to make it look like new again.
In this way we will not only achieve an excellent result, but also respect the environment and benefit from our health.

to watch video

Tips

Never forget:

  • However, remember to always act in the same direction (i.e. perpendicular) to avoid streaks that could damage and scratch the surface.
Some links you might find useful:
  • //europietre.it/pietra-naturale-manutenzione-come-procedere-pulizia/
  • How to polish gemstones

Video: cleaning paving stones with home remedies without a pressure washer - concrete stones / terrace stones / yard